Page 6
Installation Instructions
LPSA3747
Level
#14 x 2” Screws
Screwdriver
Step 5.
Insert one (1) #14 X 2” screw into
the pre-drilled mounting hole.
Step 6.
Tighten the top screw.
Step 7
. Re-level the mount and make any
adjustments at this time.
Step 8.
Pre-drill the remaining three mounting
holes.
Step 9.
Insert and tighten the remaining three
(3) #14 x 2” screws. Do not over-tighten
the
screws.
Concrete Surface Installation
Concrete Bit
Level
Step 1.
After leveling the wall plate mark all
four (4) mounting hole locations.
Step 2.
Drill four (4) pilot holes using a
drill and a (commercially available)
concrete drill bit.
Level the wall plate before
proceeding.
