Page 2
Installation Instructions
IPM-100
Place the iPad™ and its attached
dock connector into the front piece.
Step 6
Thread the USB end of the dock
connector through the slot of the
back piece.
Step 7
Thread the USB end of the
dock connector through
this slot.
Make sure the bumps of the
VESA mounting holes on the
back piece are facing away
from the iPad™.
Step 5
Attach the dock connector to the iPad™.
Use the M5 security Allen wrench
and four (4) M4 x 8mm security
screws to fasten the back piece to
the front piece.
Step 8
Attach the IPM-100 to the desired mount (not included). Refer to
the mount’s installation manual.
Step 9