Installation Instructions
Page 1
iPad™ IPM-100 Mounting Frame Installation Instructions
9531-056-001-01
Parts List
IPM-100
IPM-100 - Front Piece
(Qty 1)
M5 Security Allen Wrench
(Qty 1)
M4 x 8mm Security Screw
(Qty 4)
3130 East Miraloma Avenue
Anaheim, CA 92806 USA
USA and Canada
Phone: 1.800.368.9700
Fax: 1.800.832.4888
Other Locations
– Phone: (001).714.632.7100; Fax: (001).714.632.1044 ©Premier Mounts 2011
The IPM-100 mounting frame securely holds the Apple iPad™ or
iPad2™ (not included) in place and prevents access to all control
buttons except the home button. It fastens easily to any of Premier
Mounts’ wall or table mounts (sold separately) using the VESA
100x100mm mounting pattern. The IPM-100 provides flexibility and
security for the optimal hands-free experience.
• All trademarks are the property of the respective trademark owners.
IPM-100 - Back Piece
(Qty 1)
iPad2™ Kit
Adhesive-Backed
Bumper (Qty 8)
Adhesive Foam
Tape (Qty 2)
Step 1
Are you installing an iPad™ or iPad2™ to the IPM-100?
If an
iPad™,
skip to step 5 on page 2.
If an
iPad2™,
continue to step 2 below.
Step 2
C
C
C
C
1½˝
1½˝
Step 4
Attach four (4) adhesive-backed
bumpers to locations “
C
” on the inside
of the back piece.
Locations “
C
” are 1
½˝ away
from the center of each bump
on the back piece.
Make sure the metal bumps on
the back piece are protruding
on the opposite side of the
adhesive-backed bumpers.
Continue to step 5 on page 2.
Attach two (2) strips of adhesive foam
tape to locations “
A
” inside the front
piece.
Locations “
A
” are inside the
outer edges of the front piece.
Attach four (4) adhesive-backed bumpers to
locations “
B
” inside the front piece.
Locations “
B
” are over the centers of
the inside slots.
Step 3
Inside of Front Piece
B
B
B
B
A
A
