Installation Instructions
Visit the Premier Mounts website at http://www.mounts.com
Page 1
Storage GearBox™ for CTM-MS2 Tilting Mount Installation Instructions
9541-001-011-00
Parts List
GB-MS2
Media Box
(Qty 1)
Horizontal Support Bracket
(Qty 2)
M8 Nylon Nut
(Qty 4)
3130 East Miraloma Avenue
Anaheim, CA 92806 USA
USA and Canada
Phone: 1.800.368.9700
Fax: 1.800.832.4888
Other Locations
– Phone: (001).714.632.7100; Fax: (001).714.632.1044 ©Premier Mounts 2011
The storage GearBox™ for the CTM-MS2 tilting mount (GB-MS2)
securely holds a PC tower or similar-sized A/V equipment in between
the flat-panel and mount. This space-saving feature helps efficiently
organize your A/V installation for many applications, such as digital
signage or corporate use. The GB-MS2 is a great alternative to storing
electronics in false ceilings or bulky floor boxes.
• All trademarks are the property of the respective trademark owners.
Extension Bracket
(Qty 2)
Step 1
Follow the instructions in the CTM-MS2 manual up to page 7.
Stop at the end of the manual’s
“Installing the Wall Plate”
section.
Step 4
Use four (4) M8 x 12mm pan Phillips
screws to attach two (2) extension
brackets to the mounting brackets of
the CTM-MS2 as shown.
Insert the screws through the
back of the PEM nuts on the
extension brackets.
Mounting brackets are included with the CTM-MS2.
Screws are not to scale.
M8 x 12mm
Pan Phillips Screw
(Qty 4)
M8 x 12mm pan Phillips screw
Key
(Qty 1)
Step 5
Is the mounting pattern on the flat-panel wider than the media box?
If
Yes,
do not use the horizontal support brackets. Skip to
Step 7.
If
No,
continue to
Step 6.
Step 3
Insert a PC tower or similar-sized A/V
equipment into the media box.
Step 2
➊
Insert the media box between the
brackets and the wall plate.
➋
Hook the media box on the top rail of
the wall plate.
The lock on the media box
must be in the unlocked
position, or else it will not fit
over the rail.
Flat-panel and brackets not shown
PC
