GB-VESA42
Page 6
Visit the Premier Mounts website at http://www.premiermounts.com
Installation Instructions
Installing the Wall Plate
If you will be installing your GB-VESA42 mount to wood studs, proceed to the
“Wood Stud Installation”
section.
If you will be installing your GB-VESA42 mount to a concrete wall, proceed to the
“Concrete Installation”
section.
Determining the Mounting Surface
Wood Stud Installation
Step 1
You must secure the wall plate to two (2) wall studs
with a minimum of four (4) lag bolts (2 lag bolts for
each stud found).
1) Use a stud finder to determine the exact center of wall
studs in the vicinity of the wall plate.
2) Use a pencil to mark the exact center of the wall stud
where you will be installing your GB-VESA42 mount.
Step 2
Two people are recommended for this step; one
person to level the wall plate and another person to
mark the wall stud location.
1) Place the wall plate against the wall in the desired
viewing location.
2) Adjust the wall plate to align the mounting points in
the wall plate with the center of the wall stud.
3) Level the wall plate.
4) Use a pencil to mark the upper right mounting location
along the center of the wall stud.
X
Wood
Stud
Conc
rete
Separating the Mounting Plates
1) Loosen the (4) M6x12 screws from all the points
labled (A) on the figure.
2) Lift up to separate the front mounting plate from the
back wall plate.
(A)
(A)
(A)
(A)