ECM-3763T
Page 10
Visit Premier Mounts website at http://www.mounts.com
Installation
Instructions
Elliptical Tilt Mount Installation
The following steps must be completed by two
people.
Do not release the elliptical tilt mount until the
mount clamp is been fully engaged and the
locking nut is attached and tightened.
After determining the required distance between
each mounting point, lift the eliptical mount
assembly up to the Trio mount ring.
Place the mount clamp
fi
rmly against the underside
of the Trio mount ring.
Trio
Mount
Mount
Clamp
Mount
Clamp
Locking
Nut
Step 1
Step 2
Step 3
Flip the mount clamp closed.
Thread the locking nut onto the threaded shaft of the
mount clamp.
Use an adjustable wrench to tighten the locking
nut.
Make sure that the locking nut is completely
tightened before releasing the eliptical mount
assembly.
Proceed to the
“Attaching the Flat Panel”
section.
Closed
Position
