APP-2446 Adapter
Page - 4 -
Installation Manual
APP-2446 Installation
1. Determine your mounting configuration. Follow the provided instructions to attach the ceiling accessory that will be used.
2. Thread the APP-2446 Adapter into the ceiling accessory.
3. Turn the APP-2446 Adapter five (5) complete turns before releasing the APP-2446 Adapter.
3. Once the APP-2446 Adapter is attached, tighten all mounting hardware.
4. Use the set screw (supplied) to secure the connecting pipe.
5. Once the APP-2446 Adapter has been attached to the ceiling accessory, you may install the projector/display mount. Be sure to
follow the installation instructions that are supplied with the projector/display mount.
PBC Ceiling Installation
MAKE SURE TO HOLD THE PLASMA DISPLAY OR PROJECTOR SECURELY OR REMOVE IT FROM
THE MOUNT TO MAKE THE HEIGHT ADJUSTMENT PRIOR TO LOOSENING THE ADJUSTMENT
SCREWS. DO NOT REMOVE THE SCREWS COMPLETELY FROM THE EXTENSION ALL AT ONCE.
LOOSEN, REMOVE, ADJUST THEN RE-TIGHTEN THE SCREWS. FAILURE TO DO SO COULD RESULT
IN INJURY AND OR DAMAGE TO THE PLASMA DISPLAY OR PROJECTOR. IF POSSIBLE, ALL
ADJUSTMENTS SHOULD BE MADE PRIOR TO ATTACHING THE DISPLAY OR PROJECTOR.
PBC Ceiling Adapter
Suitable Hardware
Lower Tube
Adjustment Screws
Cable Access
Opening
Ceiling Structure
(See WARNING:)
Relocate Adjustment
Screws
Relocate Adjustment
Screws
PBC Housing or any Premier Mounts
compatible adapter
1. Secure the PBC ceiling plate or any 1-½ (NPT)
pipe-receiving adapter to the ceiling (see warning).
2. Use suitable hardware (commercially available) depending on
your installation environment to secure the four (4) mounting
points found on the ceiling plate to the ceiling structure.
3. Thread the PBC or any of Premier Mounts compatible adapters to the bottom
of the APP-2446 and secure it with the Allen Key (supplied with the PBC).
4. Refer to the PBC installation instructions to complete the installation.
