www.mounts.com | North America 800.368.9700 | Interna1-714-632-7100
Installation Guide
AM500-U
5
7
6
8
Concrete Wall Installation
1) Remove the template.
2) Insert the Finned Anchors into each hole. Lightly tap each Finned
Anchors into place with a hammer.
1) Remove the template.
2) Place the wall mount over the pilot holes.
3) Insert one (1) lag bolt and one (1) washer into each pilot hole.
Tighten all lag bolts using a socket wrench and 1/2” or 13mm
socket.
1) Place the template over the wall.
2) Level the template.
3) Tape the template to the wall.
4) Mark four (4) mounting locations on template over the center of
the wall studs.
Drill four (4) pilot holes on mark locations with a drill and 3/8”
Masonry drill bit.
Page 4