ISTM-ALL MDVR-2012_Q2_Ver 1.0
18/30
In MDVR GUI, you can setup different sensor inputs as following. You can define any or the sensor inputs to be different
function. For example, if you define sensor 1 is for panic button please connect panic button with sensor 1 signal on the
alarm box (the photo is below). Please just make sure you connect the sensor correctly with the alarm box.
1)
How to connect the signal for open/close the door
2)
How to connect the signal for braking
When the driver stamps the brake vane, the MDVR device can detect the high power level. Otherwise it is low power level.
Alarm outputs are power level output. For powerful equipments, external replay is necessary. The following diagram is for
how to wire the photoelectric alarm from alarm outputting.
Signal for opening
the door
Signal for closing
the door
Defined Sensor Input
Defined Sensor Input
+12V/24V
To connect the sensor
signal of the vehicle
by alarm box
Braking light
12V/24V
Brake Vane
