Premier Builders Guild Two-Rock Jet 22, Owner'S Manual, Page: 3 / 9

Front Panel Functions
1. Input Jack - High impedance input to the amplifier. Plug in your instrument here.
2.
Push/Pull Treble Control
- Adjusts the high frequency response. In the full counter-clockwise
position, high frequencies are cut. In the full clockwise position, high frequencies are allowed to
pass to the gain stage. When the knob is in the “out” position, the high frequency response is
boosted. This is most effective when the input g
ain is set at 12 o’clock or lower. The effect is less
dramatic as the gain control is adjusted past the 12 o’clock position.
3.
Push/Pull Mid Control - Adjusts the mid-range response. In the full counter-clockwise position,
the tone will be somewhat “scooped” of mid-range response, emphasizing the highs and lows. In
the full clockwise position, mid-range frequencies are allowed to pass to the gain stage. When the
knob is in the “out” position, the mid frequencies are boosted.
Mid pull not available in 22 watt version!
4.
Push/Pull Bass Control - Adjusts the bass response. In the full counter-clockwise position, low
frequencies are cut. In addition, the response of the treble and mid-range controls is greatly
reduced. In the full clockwise position, low frequencies are allowed to pass to the gain stage.
When the knob is in the “out” position, the low and low-mid frequencies are boosted. This is a low
frequency contour switch, changing the low and low-mid response.
Mid pull not available in 22 watt version!
5.
Gain
-
Adjusts the overall gain of the amplifier. Start with this control in the 12 o’clock position.
Pull function Bypass: This feature cuts the EQ section out of the signal path allowing more input
signal to hit the gain stage. With it engaged it will affect the natural Highs and Mids of the tube at
the input section. Function is only accessible by footswitch on 22 watt version!
6.
Master Volume
- Adjusts the output level of the amplifier. Also acts as the send level control for
any effects inserted in the loop. Pull function Lead Channel: Function is only accessible by
footswitch on 22 watt version!
7.
Lead Gain - Adjusts the input level (gain) of the lead channel.
8.
Lead master - Adjusts the output level of the lead channel.
9.
Reverb
- The front panel reverb control is the return, or mix, control. The reverb effect is
defeated with this control in the full counter clockwise position. Use in conjunction with the reverb
drive control (see REAR PANEL FUNCTIONS, next page).