Rear Panel Functions
A/C Input
- Connects the amplifier to A/C power via the power cord supplied. Unless otherwise specified, your amplifier
is designed to operate on 120 volts A/C, 60 cycles.
Fuse
- See Fuse Chart
Power Switch
- Turns power on.
Speaker Output Jacks
- There are 3 speaker output jacks; 4,8, and 16 ohms.
NEVER OPERATE YOUR AMPLIFIER
WITHOUT A PROPER SPEAKER LOAD CONNECTED
. Be sure to match the impedance of your cabinet with the
impedance (output) of the amplifier.
Effects Send
- Use this jack to send the amplifiers signal to outboard effects.
Effects Return
- Use this jack to connect the output of your effects to the amplifier.
S/N
- Your serial number is located here. We strongly suggest that you record this number and have it handy in case you
need service, or in the event that your amp is lost, stolen, or damaged.
FOOT SWITCH FUNCTIONS
LEAD - Switches amp into lead mode
BYPASS - Switchs amp into a tone stack bypass mode