14. Avoid the use of an extension cable as this may overheat and cause
a fire.
15. DO NOT insert or allow objects to enter any ventilation or exhaust
opening as this may damage the heater and could cause an
electrical shock or fire.
16. Always switch off and disconnect from the mains before attempting
to move the heater.
17. DO NOT use the heater in areas where petrol paint, or other
flammable goods and objects are stored.
PARTS DESCRIPTION
Wall Mounting Diagram
This product can be hung from the wall as shown, but any fixture must be
capable of supporting 6kg (No fittings are provided)
Carry handle
OPERATING INSTRUCTIONS
Control
switch
Ensure the heater is placed on a flat and level surface. If the unit is knocked
over or not on a level surface the 360degree safety tip-over switch will
operate and the heater will not work. Never use the heater on chairs, beds or
other soft / unstable surfaces.
Heating
Element
Grille
Control
switch
• Check the unit is in the off position and plug into the power socket.
• Set the thermostat dial to the maximum temperature.
Stand
• The fan heater will switch on when the function selector is set to one of the
three power settings.
• Once the room reaches the required temperature, the heating element will
stop working but fan keeps working .Once the temperature decreases the
heating element will start working again.
The heater now starts and stops automatically and thus keeps the
room temperature constant.
Always switch off and unplug from the power socket when not in use.
