background image

A. IMPORTANT SAFETY INSTRUCTIONS 

PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS 
PRODUCT. 
 

Use this heater only as described in this manual. Any other use not recommended 
by the manufacturer may cause a fire or electrical shock. 
 
When using electrical appliances, basic safety precautions should always be 
followed: 
1. 

Before operating the heater remove the unit from its packaging and check it is in 
good condition. 

2. 

This heater is hot when in use. To avoid burns, do not let bare skin touch hot 
surfaces. Always use handles when moving this heater. Keep flammable 
material, such as furniture, pillows, bedding, papers, clothes and curtains at 
least 3 foot (0.9 m) from the front of the heater and at least 1 feet (0.3 m) away 
from the sides and rear. 

3. 

The surfaces of this heater are hot whilst in operation. Always allow a cool down 
period before moving it to another location.  Keep all  flammable materials well 
away from the heater. 

4.  Extreme caution is necessary when any heater is used by or near children or 

pets and whenever the heater is left o p e r ating and unattended. 

5. 

Always unplug heater when not in use. 

6. 

Do not operate any heater with a damaged cord or plug, after the heater 
malfunctions, has been dropped or damaged in any  manner.  Return the heater 
to an authorised service facility for examination and repair. 

7. 

Do not use outdoors. This heater is not intended for use in wet or damp locations. 
N ever locate heater where it may fall into a bathtub or other water container. 

8. 

Do not run cord under carpeting. Do not cover cord with rugs or   runners. Arrange 
cord away from an area where it may be tripped over. Do not use this heater with 
a programmer, timer or any other device that switches the heater on 
automatically, since a fire risk exists if the heater is covered or positioned 
incorrectly. 

9. 

To disconnect heater, turn switches to the off position and remove plug from the 

power socket. Pull only by the plug. Never pull on the cord. 

10.  Do not place the heater on soft surfaces.  Always place on a flat level surface.  
11.  Do not insert or allow objects to enter any ventilation or exhaust opening as this 

may cause an electric shock or fire, or damage the heater. 

12.  Do not use it in areas where petrol, paint, or flammable liquids are used or stored. 
13.  Do not let children play with the packaging, for example plastic bags. 
14.  Check the household voltage to ensure it matches the appliance's rating plate 

specification. 

15.  Avoid the use of an extension cord as it could overheat and cause a fire. 

 

READ & SAVE THESE IMPORTANT INSTRUCTIONS

 

B. BS PLUG WIRING 

 

Wiring Instructions:  Should it be necessary to change the plug please 
note the wires in the mains lead are coloured in accordance with the 
following code:

 

BLUE - NEUTRAL 

BROWN - LIVE 

GREEN AND YELLOW  - EARTH 

 

As the colours of the wires in the mains lead of this appliance may not 
correspond with the coloured markings identifying the terminals in your plug, 
proceed as follows: 
 
1. The 

BLUE

 wire is the 

NEUTRAL

 and must be connected to the terminal 

which is marked with the letter 

N

 or coloured 

BLACK

2. The 

BROWN

 wire is the 

LIVE

 and must be connected to the terminal which 

is marked with the letter 

L

 or coloured 

RED.

 

3. The 

GREEN/YELLOW

 is the 

EARTH

 and must be connected to the 

terminal which is marked with the letter 

E

 or     or coloured 

GREEN OR 

GREEN/YELLOW

4.  Always ensure that the cord grip is positioned and fastened correctly. 
 
If a 

13A (BS 1363)

 fused plug is used it must be fitted with a 

13A

 fuse. If in 

doubt consult a qualified electrician. 
 

Wiring for a 13 Amp Plug (BS1363) 

Please note. The Earth Terminal is marked with the letter 

E

 or Earth Symbol        

 
 
 
 
 
 
 
 
 

Summary of Contents for N10T24






Reviews: