Page 5
FLUORINATED GASES
The appliance contains refrigerant gas which is subject to control under the
Fluorinated Greenhouse Gases Regulations 2009
. It is a criminal offence
knowingly to allow the refrigerant gas to leak to the atmosphere. It is also a
criminal offence to work on the product unless suitably qualified.
PAT TESTING
When used in a workplace, this product must be safety-tested yearly by a
qualified electrician (PAT Tested) in order to comply with the Electricity at Work
Regulations.
We recommend that it is PAT tested regularly when used in a domestic
environment.
GENERAL SAFETY REQUIREMENTS
Domestic wiring must be tested periodically by a qualified electrician at least
once every 10 years or at every change of occupancy.
For office and retail premises, and buildings such as village halls, the wiring must
be inspected at least once every 5 years.
It is recommended that all building be fitted with smoke alarms (it is mandatory
for new buildings).
MAINTENANCE
Before cleaning, turn the appliance off, and disconnect from the mains
supply. The appliance may then be cleaned using a damp cloth with a drop
of washing-up liquid to remove any dust or dirt from the case. Do no use
stronger detergents or solvents as these may damage the surface finish.
Clean the inside of the bucket to prevent the build-up of bacteria.
Using a dry 1" (25mm) paint-brush, remove any dust from the grilles.
The filter should be cleaned every fortnight (or more often if the atmosphere
is particularly dusty).
To clean the filter, pull the tabs shown and remove
the two filter covers.
The filters are attached to the back of the cover.
Clean the filter with a vacuum cleaner, or wash in
warm water with a drop of washing-up liquid.
Ensure that the filter is completely dry before
replacing.
