USING THE THERMOSTAT
The thermostat can be use to regulate the room temperature.
Turn both switches on (high heat), and rotate the
temperature control fully clockwise.
The heater will then operate at maximum output. When the
desired temperature is reached, rotate the temperature
control anticlockwise until a click is heard. The heater will
then switch on and off to keep the room at the desired
temperature. The indicator lights in the switches will show
that this is happening. Any of the heat setting may be used.
If the temperature control is rotated fully anticlockwise to the
snowflake symbol, it will operate as a "frost-stat" and switch
the heater on if the temperature drops below 4°C, preventing
damage by frost.
USING THE TURBO FAN
The Turbo Fan assists the natural convection to heat the
room more quickly. Turn on the turbo fan when required
using the switch with the fan symbol.
MAINTENANCE
Before cleaning, turn the heater off, and disconnect from the
mains supply. The heater may then be cleaned using a damp
cloth with a drop of washing-up liquid to remove any dust or
dirt from the case. Do no use stronger detergents or solvents
as these may damage the paint finish.
Using a dry 1" (25mm) paint-brush, remove any dust from the
grilles.
If the mains lead is damaged, it must be replaced by the
manufacturer or and authorised service centre. If the
mains plug needs to be replaced
,
proceed as follows:
Page 6
