background image

Rotate the dial clockwise until the arrowhead at the right of
the dial points to the current time.
To use the heater in timed mode, it should be permanently
connected to the mains supply. If the power is disconnected,
the clock will stop.
To operate the heater in timed mode, the three position
switch within the dial should be in the centre position. If it is in
the "I" position, the heater will be permanently ON. If it is in
the "O" position, the heater will be permanently OFF.

OPERATING COSTS

At time of going to press, the average cost of electricity is
£0.12 per unit (kilowatt-hour). The amount you are being
charged will be shown on your electricity bill.
At this cost, the EH1369 will cost £0.12 per hour to run on the
"low heat " setting, and £0.16 per hour to run on the "medium
heat" setting or £0.27 per hour to run on the "high heat"
setting, with the thermostat set to its maximum.
If the thermostat is used to regulate the temperature the
operating costs will be lower, depending on the room
temperature.

MAINTENANCE

Before cleaning, turn the heater off, and disconnect from the
mains supply. The heater may then be cleaned using a damp
cloth with a drop of washing-up liquid to remove any dust or
dirt from the case. Do no use stronger detergents or solvents
as these may damage the plastic.
This heater is filled with a precise quantity of special oil.
Repairs requiring the opening of the oil container are only to
be made by the manufacturer or his service agent who
should be contacted if there is an oil leak.
Using a dry 1" (25 mm) paint-brush, remove any dust from
the grilles.

 Page 5

Summary of Contents for EH1369









Reviews: