User Guide
EH1230
Dehumidifying:
The EH1230 can be used for dehumidification provided that the
ambient temperature is above
19°C. Keep the windows and doors
closed to increase the efficiency of
the dehumidifying operation.
Do not use the exhaust tube.
Remove the drain cover and rubber
bung, and connect a permanent
drain tube to the water outlet.
Repeatedly press the MODE button (1), until the "snowflake"
indicator (8) illuminates. Select the preferred fan speed using the
SPEED switch (5). Indicators (13) and (14) show whether slow or
fast fan speed is selected.
In dehumidification mode, cold air will be produced at the front of
the unit, and warm air at the back, but the overall room
temperature will be unaffected.
TIMER
The built-in timer can be used to set the unit to run for a certain
length of time before automatically switching off.
Press the timer button (2) and set the number of hours of operation
using the + and - buttons. The maximum setting is 12 hours. When
the timer is in operation, the timer indicator (10) will be illuminated.
To cancel the timer, press the timer button (2) again until, the timer
indicator (10) goes out.
The unit will then run for the set number of hours then switch off.
REGULATING AIR DIRECTION.
Page 8