Installation
This item must be installed by a qualified refrigeration engineer.
A FULL SITE SURVEY MUST BE CARRIED OUT PRIOR TO INSTALLATION.
It is the responsibility of the installer to ensure the suitability of both the product
for the installation and the installation location for the product.
Notes
The minimum safe distances must be observed when deciding on the installation
location. See diagram below.
The product should be installed away from other heat sources or direct sunlight.
The product should be installed with observance
to
the product safety
information.
The
cut-out
hole should be slightly bigger than the size of the unit. Due to slight
changes in size, please ensure the
unit
is measured at the time of fitting.
The distance of
any
obstruction from
the
window unit inside should be
upper 300mm, lower 1500mm, left
500mm, right 500mm, front
1500mm.