Page 17
6)
Sleep Mode
(This Mode is available when using Remote control)
z
The air conditioner is in operation
z
Press
SLEEP
Button, the “
” appears on the Remote control display.
z
The unit will switch to low speed after 2 hours.
z
When in cooling mode, during the first two hours, the temperature will
be increased 1
o
C per hour. The unit will then operate at 2
o
C higher than
the originally set figure for 6 hours. The temperature will then return to
the originally set figure
z
When in heating mode, during the first two hours, temperature will be
decreased 2
o
C per hour. Then temperature will be keeping at 4
o
C Lower
than the original set figure for 6 hours. The temperature will then return
to the originally set figure.
z
When in dehumidify mode, the temperature will not be changed.
NOTE
In exceptional conditions of low temperature and high humidity, condensate
may accumulate at a rate faster than it can be discharged. The symbol
‘E6‘
will
appear in the control panel. Check any blockage in drain port.
