Chronoskop CHR-9 Timegrapher
User manual
www.CHRONOSKOP.com
14
3.3. Using the headphone jack
The Timegrapher has a headphone jack for listening to the clockwork. The volume is
adjusted using the microphone sensitivity knob. Before plugging in the microphone plug, the
volume / sensitivity must be set to minimum. Place the watch on the piezo microphone and
slowly increase the volume. Keep the headphones as far away as possible from the piezo
microphone.
CAUTION: Setting the volume too high may cause hearing damage!
3.4. Measurement with external sensors
External sensors, such as radio receivers or active microphones, can be
connected to the built-in 4-pin Mini-DIN socket. Only devices from the
original accessories may be used. Please read the user manual
enclosed with the optional active microphone.
3.5. Menu structure
The following is an overview of the menu assembly:
Settings
Main Menu
Beat number setting
Save
the frequency
Measurment
Start
Calibration
of Oscillator
Last measure
Device informations
Language
Light
(ON/OFF)
Source
Lift angle
Time integration
(ON/OFF)
Quarz frequence
Heater
(ON/OFF)
