Fasteners with friction buckles in
the leg area: Guide the loose
strap end through the friction
buckle from the backside, then
insert it at the left of the movable
part and pull to the front.
Now, guide the strap end which
has been pulled to the front,
around the movable part and
reinsert to the back.
Finally, pull tightly.
Front mounted fall arrest attach-
ment element: The right and left
strap loops are connected with
each other by means of a con-
nector (karabiner) as per EN 362
– then close the safety mecha-
nism on the snap safety catch
according to the instructions!
Models PASA 51 and PASA 53
have a second pair of strap loops
which can be used alternatively
in the same way.
Open the compact snap buckle:
Press simultaneously both
release levers and pull the other
buckle half in direction of the
arrows.
Open the metal snap buckle:
Press simultaneously both
release levers and pull the other
buckle half in direction of the
arrows.
Pass-thru buckles: Insert the
smaller frame from the back
through the larger one. Then, pull
tightly (to tighten) at the free
strap end; loosen only in the
open condition (pull at the frame).
