See ISO 16016 ©PrehKeyTec GmbH 2015
Subject to change w/o prior notice
7
Dec 07
th
2015
Version 1.0
Install HSM Driver
Change to folder “Driver/Scanner/HSM USB Serial Driver/HSM USB Serial Driver” and follow
the instructions in the “Readme.txt” for installation of Scanner driver. The version of the
HSM USB Serial Driver can be changed without notice. You must run the “setup.bat” as an
administrator.
The folder “RegTweaks” contains some registry files for
Scanner_Force-to-Com_OFF.reg (takes the next free COM port)
Scanner_Force-to-Com12.reg (force to COM port 12)
Scanner_N5600_ignoreUSB-SNo_OFF.reg (does not ignore USB serial number, USB
driver installation on each changed USB port)
Scanner_N5600_ignoreUSB-SNo.reg (ignores USB serial number, you can change the
USB port without new driver installation)
If you wish to use the tool “PKT4000Reader.exe” for demonstration please set the COM port
to COM12. This can be done with “Scanner_Force-to-Com12.reg”.
Install RFID Driver (optional)
The RFID driver needs not to be installed if the RFID reader is not available.
Change to folder “Driver/RFID/Driver_R1_identiClass_3500” and follow the instructions in
the “ReadMe_HID_identiCLASS_MSI.txt” or “ReadMe_HID_identiCLASS_EXE.txt” for
installation of RFID driver. The version of the identiClass 3500 Driver can be changed without
notice.
Windows® 7 and newer offers a new plug & play feature for smart cards. The operating
system tries to find a smart card driver when a smart card comes into the field of the reader.
This does not mean that the installation of the driver failed nor that the smart card or its
driver has not been recognized. To avoid this Windows® message, you may disable the plug
& play service for smart cards.
4
5
