MINI PAK’R V3
- MM2I2IN115 / MM2I2IN230
Page 13 of 21
Sleep mode
If the machine is not used for 30 minutes, it will enter
“Sleep” mode. The Display will read “SLP”. To
resume Air Cushion production, press the
Reset
Button
. The Seal Bar will begin heating. Press the
Start Button
again when the
green LED
remains
steady green and the Display reads “
rdy
” to resume
Air Cushion production.
Machine settings
Changing Machine Settings
The machine automatically chooses the correct air and temperature settings for the Film Roll
you have loaded. You do not need to adjust Machine settings manually. However, if the
automatic settings are not optimal, the Control Panel allows you to change the following
settings:
•
Length control
•
Air – Fill level control
•
Seal temperature control
Length control
Length Control sets the number of Air Cushions to be
produced each time you press the
Start Button
. You have
2 options:
Continuous Mode
Length Control at the factory is preset at continuous
production. Press the
Start Button
and the machine will
run the film until the Film Roll is empty or the
Stop Button
is pressed. The Machine will display the number of Air
Cushions produced.
Number of Cushions
If you want to produce a fixed length of Air Cushions,
press the
+ Button
until the desired number is displayed.
The machine will count down the number of Air Cushions
yet to produce.
To change from Fixed to Continuous mode, press the
- Button
until the Display shows ”
---
”.
--
SL
