Item 68527 / 68528
Page 5
For Pump technical questions, please call 1-800-444-3353.
For engine technical questions, please call 1-800-520-0882.
Sa
Fet
Y
O
Pe
R
ati
O
n
m
aintenan
C
e
Setu
P
Service Precautions
1.
Before service, maintenance, or cleaning:
a.
unplug all devices from the generator.
b.
turn the engine switch to its “OFF” position.
c.
allow the engine to completely cool.
d.
then, remove the spark plug
cap from the spark plug.
2.
Keep all safety guards in place and in
proper working order.
Safety guards include
muffler, air cleaner, mechanical guards,
and heat shields, among other guards.
3.
Keep all electrical equipment clean and
dry.
Replace any wiring where the insulation is
cracked, cut, abraded, or otherwise degraded.
Replace terminals that are worn, discolored, or
corroded. Keep terminals clean and tight.
4.
Do not alter or adjust any part of the
equipment or its engine that is sealed by the
manufacturer or distributor. Only a qualified
service technician may adjust parts that may
increase or decrease governed engine speed.
5.
Wear anSi-approved safety goggles,
heavy-duty work gloves, and dust
mask/respirator during service.
6.
maintain labels and nameplates on
the equipment.
These carry important
information. If unreadable or missing, contact
Harbor Freight Tools for a replacement.
7.
Have the equipment serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the
equipment is maintained. Do not attempt any service
or maintenance procedures not explained in this
manual or any procedures that you are uncertain
about your ability to perform safely or correctly.
8.
Store equipment out of the reach of children.
9.
Follow scheduled engine and
equipment maintenance.
Refueling:
1.
Do not smoke, or allow sparks, flames,
or other sources of ignition around the
equipment, especially when refuelling.
2.
Do not refill the fuel tank while the
engine is running or hot.
3.
tO PRevent Fuel leaKaGe anD FiRe
hazaRD, Do not overfill with fuel. Fill with
fuel according to the Fuel level information
below the Specification chart for your model.
4.
Do not fill fuel tank to the top.
Leave a little
room for the fuel to expand as needed.
5.
Refuel in a well-ventilated area only.
6. Wipe up any spilled fuel and allow excess
to evaporate before starting engine.
to
prevent FiRe, do not start the engine
while the smell of fuel hangs in the air.
Save theSe
inStRuCtiOnS.