Page 8
For technical questions, please call 1-888-866-5797.
ITEM 61725
SAFETY
Op
ERA
TION
M
AINTENANCE
SETU
p
Set Up
Read the ENTIRE IMpORTANT SAFETY INFORMATION section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
TO pREVENT SERIOUS INJURY:
Operate only with proper spark arrestor installed.
Operation of this equipment may create sparks that can start fires around dry vegetation.
A spark arrestor may be required.
The operator should contact local fire agencies for laws or regulations
relating to fire prevention requirements.
Components and Controls
20A AC BREAKER
PUSH TO RESET
20A AC BREAKER
PUSH TO RESET
30A AC BREAKER
PUSH TO RESET
30A AC BREAKERS
PUSH TO RESET
46A AC BREAKER
AC 120V
AC 120V
20A
MAX
20A
MAX
30A
MAX
30A
MAX
AC
120V
AC 120
/240V
AC 120
/240V
46A MAX
PUSH TO RESET
DC 12V 8.3A
MAX
RESET
GROUND
IF ANY CIRCUIT BREAKERS TRIP ENSURE THAT ALL CIRCUIT BREAKERS ARE RESET
LOW OIL ALERT
START
ENGINE SWITCH
OFF
ON
CHOKE
Pull at Start.
Push when Running.
HC = Current
Hours
HT = Total
Hours
V = Voltage
Hz = Hertz
IF POWER SHUTS OFF WITH ENGINE RUNNING:
1.
UNPLUG DEVICES
2.
RESET ALL CIRCUIT BREAKERS
3.
MAKE SURE DEVICE AMPS ARE LESS THAN 92 TOTAL (120VAC)
Display
Switch
Choke Knob
120/240VAC
46A Breakers
Low Oil Alert
120/240VAC 46A
Receptacle
120/240VAC
30A Receptacle
and Breakers
120VAC 30A
Receptacle
and Breaker
120VAC 20A
Receptacles
and Breaker
120VAC 20A
Receptacles
and Breaker
Ground
Terminal
12VDC Receptacle
and Breaker
Figure A: Control panel