manualshive.com logo in svg

Predator 58169, Owner'S Manual & Safety Instructions

Share
Download
Predator 58169 Owner'S Manual & Safety Instructions Download Page 3

Page 3

For technical questions, please call 1-888-866-5797.

ITEM 58169 

        

SAFETY

SETU

p

Op

ERA

TION

M

AINTENANCE

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol.  It is used to alert you to potential 

personal injury hazards.  Obey all safety messages that 

follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,  

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in minor or moderate injury.

Addresses practices not related to personal injury.

Symbol Definitions

Symbol

property or Statement

RpM

Revolutions Per Minute

Hp

Horsepower

WARNING marking concerning 

Risk of Eye Injury.  Wear ANSI-approved 

safety goggles with side shields.

Read the manual before 

set-up and/or use.

WARNING marking concerning 

Risk of Hearing Loss.  

Wear hearing protection.

Symbol

property or Statement

WARNING marking concerning 

Risk of Respiratory Injury.  

Operate engine OUTSIDE and far away 

from windows, doors, and vents.
WARNING marking concerning 

Risk of Fire while handling fuel.  

Do not smoke while handling fuel.
WARNING marking concerning 

Risk of Fire.   

Do not refuel while operating. 

Keep flammable objects 

away from engine.

Summary of Contents for 58169





























Reviews:

No comments

Brands by name

Popular brands

Load more brands