Page 4
For technical questions, please call 1-888-866-5797.
Item 57322
Installing the Foot Support
1. Remove the two existing feet/cushions
from under the front of the pump frame
and the hardware that secures them.
2. Secure the feet/cushions to the middle holes of
the Foot Support (11) using the hardware that
secured them to the pump frame previously.
3. Secure the Foot Support under the front of
the pump frame, where the feet/cushions
were installed previously. Attach it using
two Short Bolts (23), Spring Washers (21),
Washers (20), and M6 Nuts (17).
existing
foot
existing
foot
Foot
Support
(11)
Short Bolt (23)
Figure A:
Installing the Handle
1. Attach the Crossbar (13) handle assembly to the
pump frame using one Crossbar Bracket (14)
on each end secured with 4 Bolts (18), Spring
Washers (21), Washers (20), and M6 Nuts (17).
2. After the Crossbar is in place and adjusted
properly, tighten the Bolts and Nuts securely.
Crossbar (13)
Bolt (18)
Crossbar
Bracket (14)
Figure B:
