Precor UBK 815, Assembling And Maintaining Manual

Page: 16 / 92

14
Assembling and Maintaining the UBK 815 Upright Exercise Bike
Unpacking the Equipment
The shipping container for Precision Series exercise bikes
consists of the following items:
y
Wooden pallet
y
Cardboard base
y
Cardboard cover
WARNING
Do not attempt to move the equipment off of
the pallet by yourself. Have at least one
other person help you, and use safe lifting
techniques.
To unpack the bike:
1. Carefully remove all staples securing the cover to the
cardboard base.
2. Lift the cover upward and set it aside.
3. Carefully remove any staples holding the cardboard
spacers in place at the ends of the container.
4. Pull the cardboard spacers away from the equipment and
set them aside.
5. Cut all plastic ties securing the equipment in place.
6. Remove the upright support from the container and set it
down near the spot where you plan to install the
equipment.
7. With the help of at least one other person, lift the body
assembly and move it forward until its front legs can be
lowered to the floor.
8. With the help of at least one other person, carefully tilt
the body assembly forward until it rests on the wheels
attached to the front legs. Roll it to the location where you
plan to install it, then tilt it back until it rests flat on the
floor.