Precor TRM 800, Assembling And Maintaining Manual

Page: 55 / 68

Maintenance
53
Reading the Active Status Light
The active status light is located at the front edge of the
treadmill hood, as shown in the following figure. The light is
large enough and bright enough to allow you to check the
condition of all your treadmills at a distance.
Figure 35: Status light location
During normal operation, the status light is a steady blue. It
changes color and pattern if the treadmill’s electronic drive
unit detects a mechanical or electrical problem.
Table 4. Active status light appearances and their meanings
Status light
appearance
Meaning Action required
Steady (solid)
blue
The treadmill is operating
normally and does not
currently need
maintenance.
None.
Pulsing blue The treadmill is due for
scheduled maintenance
(P80 console only), or the
treadmill belt needs to be
replaced (except for 230 V
models).
Perform the needed
maintenance, then
reset the status light.
Steady (solid)
yellow
The treadmill has detected
and recovered from an
error. It can still be used,
but some functions may
not be available.
Refer to the console’s
event log for more
information.