©2019 Precor Inc. | Seated Calf Extension RSL 623 | Assembly Guide
8
6
Tool: Hex wrench, 5 mm
The seat guide rod comes preinstalled on main frame and
must be removed to attach the seat assembly. Unscrew top shaft
collars at both ends of seat guide rod.
7
Remove metal and rubber washers from one end of seat guide
rod (see dashed arrow).
8
Slide seat assembly on to rod. Replace washer and bumper
removed in
step 7
. Ensure metal washer is towards collar and rub-
ber washer is towards seat. Set seat guide rod back into collars.
9
Tool: Hex wrench, 5 mm
Replace shaft top collars and screws removed in
step 6
. Slide
washers on seat guide rods to ends of rod.
10
1 shoulder bolt
Tool: Hex wrench, 6 mm
Position seat assembly so seat brace and seat brace slider align
(slider is preassembled on seat frame). Secure with shoulder bolt.
If seat is not vertical, adjust the position of the rod end.
11
1 shaft
2 end caps
2 M12 x 35 mm FHCS
Tool: Hex wrench, 8 mm
Attach pivot arm to main frame .
1
2
33
1
40
3
39
26
40 39
1
26
3
39
40
33
