©2019 Precor Inc. | Inner Thigh RSL 620 | Assembly Guide
7
Moving Parts
Image
Hardware
Instructions
1
1 hex head screw 5/16-inch x 1½-inch
Set a
temporary
fastener in the
front
hole (see arrow) of the seat plate
to hold it in place during leg installation. Install LEFT leg pulley first
and ensure shaft at top rests in within partial collar under seat. Match
the labels on the leg and lower cross brace.
2
Repeat to install RIGHT side leg assembly . Match the labels on
the leg and lower cross brace.
3
2 collars
4 M6 x 20 mm SHCS
Tool: Hex wrench, 5 mm with extension
Have assistant gently press knee bars together and center in frame.
Secure the legs with the collars under the seat.
DO NOT fully tighten the collars yet.
Remove all and labels.
7
39
7
4
36
41
3
36
4
41
7
3
39
L
R
L
R