©2019 Precor Inc. | Triceps Extension RSL 208 | Assembly Guide
6
Moving Parts
Seat Assembly
Image
Hardware
Instructions
1
1 wave washer
1 spacer
1 end cap
1 M12 x 35 mm FHCS
Tool: Hex wrench, 10 mm
Slide handlebars and hardware onto shaft as shown.
Align arrows on
handlebars and frame
to ensure handlebars are on correctly.
Align hole in end cap with the shaft pin and secure the handlebars.
2
1 M10 x 25 mm SHCS
Tool: Hex wrench, 8 mm
Turn and center handlebars on shaft and secure.
Remove all arrow labels.
3
Image
Hardware
Instructions
1
4 hex head screws 5/16-inch x 1½-inch
4 washers, 9 mm
Tool: Socket wrench ½-inch with extension
Align the back plate to the seat base frame . Place the seat
pad over the plate and align the
front
holes. Secure the seat
pad through the plate and frame.
46
3
53
31
30
42
1
46
30
31
42
27
4
2
35
48
27
35
4
2
48
34
