Discovery Series Plate Loaded Line Owner's Manual: Maintaining Your Plate Loaded Equipment
7
Weekly Maintenance
Condition and deep clean the upholstery weekly with a lanolin-based hand
cleaner or upholstery cleaner.
Important
:
To clean the upholstery, do not use cleaning products that have any of
these ingredients: solvents, alcohol, ammonia, or petroleum. Use a mild
detergent-based cleaner instead.
Monthly Maintenance
Perform the following tasks monthly to maintain the equipment and keep it
operating smoothly:
Inspect frames and movement arms
Inspect the bearings and bushings
Check and lubricate the seat adjustment
Inspect all fasteners
Inspect Frames and Movement Arms
Inspect frames and movement arms monthly for proper function and integrity.
Inspect frames (particularly at the joints) for cracks, chipped paint, or rust. If
any cracks are found, take the equipment out of service immediately and have
a qualified maintenance technician repair it.
Touch up dings and chips with paint and replace any component at the first
sign of wear.
You can order touch-up paint from Precor by calling Customer
Support.
To remove surface rust from the frame, rub lightly with a fine wet/dry
sandpaper or fine steel wool. Finish with Precor touch-up paint if needed.
Maintain paint luster with an application of a mild automotive wax product.
To maintain the powder coated, plated, and chrome parts, use a mild
detergent-based cleaner for light dirt and grime removal. For removing heavier
dirt and grease and for polishing, use a good automotive polish. For scuffs and
marks that are not removed by the above methods, use a fine-grit cleanser. Do
not use solvents, lacquer thinner, acetone, or fingernail polish remover.
