To test that the console and equipment are working:
Use this checklist of procedures for testing and follow each step in order.
Install the console based on the information on the other side of this sheet.
Verify that the Ethernet patch cables from the floor or wall cannot become caught on the equipment’s moving components (Not applicable for wireless
connections).
Verify these motion control operations work:
Elevation and speed
Resistance (Bikes, EFX, AMT)
Scan TV channels.
1.
Verify that available channels match the channel list.
2.
Rename the channels if necessary.
3.
Set the default channel, if applicable.
Touch
GO
, then verify these operations:
Channel up/down controls
Volume up/down controls
Channel changes on the channel list
USB connection (for charging a personal media player and updating Preva software)
Headphone jack
STOP button and emergency stop lanyard (TRM only)
Verify that the heart rate display works:
1.
Begin exercising on the equipment and grasp both touch-sensitive handlebars. The heart icon flashes while the heart rate is read. You must maintain contact
with both metal plates on each handlebar to ensure an accurate reading.
2.
Within ten seconds, your heart rate number appears in the HEART RATE (HR) display.Perform the following checks if a number does not appear:
a.
Verify that the HR cable is properly connected.
b.
Repeat the test with a different person. In rare instances, it may not work properly for a few individuals.
c.
Repeat this test using a chest strap or a wireless pulse simulator. You’ll get better results than if you grasp the touch-sensitive handlebars.
DO NOT hold onto the handlebars during the reading or you’ll override the HR results.
Verify IP connectivity. Go to
System Settings
>
Connectivity
. The IP address field should be populated (10.15.80.90, for example).
Verify the microSD card is securely inserted.
Register the equipment. Make sure you have this info:
Location code
Precor technician account name and password
Serial number from the base
Friendly name assigned to the equipment by the facility (Example: Equipment Type-Floor-Row-Number)
To complete registration for Preva-networked facilities:
1.
Enter the Preva server name (na.preva.com for all sites).
2.
Enter the assigned account name and password.
3.
Follow the onscreen instructions to register the product.
Ask the facility's Preva administrator to log on to Preva Business Suite and confirm that all networked fitness consoles appear there.
P82 Installation Guide | P/N 304009-103 rev C, ENU
©Precor Incorporated | September 2016
