Precor EFX 245 Quick Start Card Download

Page: 105 / 107

EFX 400 Series Assembly Guide

Changing the EFX 447 from Moving Arms to
Fixed Arms

The EFX 447 is assembled with movable arms; however, this model includes an

option that allows you to convert the movable arms to fixed arms.

To convert to fixed arms:

Disconnect the socket end of the lower link arm from the pedal frame by

pressing the pin on the socket end and pulling it outward.

Figure 42: Location of pin on socket end of lower link arm

Twist the socket end toward the floor and insert the pin into the quick pin

release socket on the base frame in front of the back cover.

Figure 43: Changing socket end position

Repeat the previous two steps for the pedal on the opposite side of the EFX.

Figure 44: Position of socket end in base frame

To convert the EFX back to moving arms, perform this procedure in reverse

order.

Summary of Contents for EFX 245












































































































Search results

Summary of Contents for EFX 245

Reviews:

Related manuals for EFX 245

Brands by name

Popular brands

Precor EFX 245, Quick Start Card

Search results

Summary of Contents for EFX 245

Reviews:

Related manuals for EFX 245

Brands by name

Popular brands