Precor CW-408, Assembly Manual

Page: 10 / 48

CW-408 Assembly Guide
page 10
Assemble the Unit
1. Attach the Cross Brace to the Upright Frame with
two Backing Plates using
four 5¼-inch buttonhead screws (A)
eight ½-inch washers (B)
four ½-inch locknuts (C)
four ½-inch hat washers (K)
Loosely tighten the fasteners so the Upright Frame
is stable, but adjustments can be made when
installing the Back Frame.
2. Attach the Back Frame to the Cross Brace using
four ¾-inch buttonhead screws (D)
four ½-inch split washers (E)
Wrench tighten.
3. Make sure the unit is stable and the front of the
Back Frame rests firmly on the floor. Return to the
Upright Frame and wrench tighten the fasteners
using a ¾-inch open-end wrench. Snap a plastic
cap (Q) over each of the four locknuts.
Assemble the Unit
4 - 5¼” buttonhead screws
8 - washers
4 - locknuts
4 - hat washers
4 - plastic caps
4 - ¾” buttonhead screws
4 - split washers
Cross Brace
Backing
Plate
Back Frame
Upright
Frame