Precor Ab-X100 Assembly Manual Download Page 13 | Manualshive

Page: 13 / 48

Precor Ab-X100 Assembly Manual Download Page 13

Ab-X100 Assembly Guide

page 13

Attach the Seat and Back Pad

Seat Pad

4 - 1¼” buttonhead screws

4 - split washers

4 - flat washers

Back Pad

Back Pad Channel
Support

Main Frame

Attach the Seat and Back

Pad

1. Attach the Seat Pad to the Main Frame using

four 1¼-inch buttonhead screws (G)
four split washers (E)
four flat washers (F)
Wrench tighten.

2. Attach the Back Pad to the Back Pad Channel

Support using
four 1¼-inch buttonhead screws (G)
four split washers (E)
four flat washers (H)
Wrench tighten.

This completes the assembly of the Ab-X100.

Clean the Pads and

Assembly

To remove surface dirt and perspiration, clean seat
or back pads with a mild soap and water solution in a
spray bottle. Spray seat or back pads lightly and wipe
dry with a clean cloth.

Important:

To clean the upholstery, do not use

cleaning products that have any of these ingredients:
solvents, alcohol, ammonia, or petroleum. Use a mild
detergent-based cleaner instead.

Use the same procedure to clean the Main Frame and
plastic parts.

Frequently, vacuum the floor underneath the Ab-
X100 to prevent the accumulation of dust and dirt. If
necessary, use the Footrest to lift the front end and
tip the Ab-X100 onto its wheels to roll it to a different
location.

4 - 1¼” buttonhead screws

4 - split washers

4 - flat washers

«
...
11
12
13
14
15
...
»

Summary of Contents for Ab-X100

















































Reviews:

No comments