4
REMOTE CONTROL
3
5
6
10
11
7
1. POWER: Press
this button to
ON/OFF
the unit. Four dots (- - - -) is displayed when
standby.
2. INPUT:Press
this
button
to
toggle
between
the
various
inputs
for
LINE
(
AUX
), USB/SD
, FM ,
Bluetooth.
3. KEY Number for selecting the certain track for
USB/SD or stored channel in FM.
4. MUTE: Press this button to mute
5. VOL+: Press this button to increase the volume.
6. VOL-: Press this button to reduce the volume.
7. CH-/ : Press this button to select the previous
track or stored channel for USB/SD/Bluetooth/
FM.
When on USB/SD mode, hold this button to fast
backward .
8. CH+/ : Press this button to select the next
track or stored channel for USB/SD/Bluetooth/
FM.
When on USB/SD mode, hold this button fast
to forward.
stand by
16. Power button: There are three possible settings. Setting the unit to DC (BATT) will
allow the unit to play using only internal battery.
When set to AC, the unit can also be powered by an external power supply
(electrical outlet) even if the battery is dead.
*In AC setting the unit will still under charging, but it will do very slowly. To charge
the unit properly, set the unit to OFF.
17.
DC 12V IN is for connecting to 12V external battery if needed. Make sure positive
to positive (red +) negative to negative (black -).
18.
Microphone Input(1/4"): Connect a microphone to this microphone input
terminal.
21.AC Connection: Connect the power cord to AC outlet.
22.Antenna is for receiving the FM signal. Before used, extend the telescopic
FM antenna. Pack up the FM antenna to better protect it after used.
AUX(1/8"): The Input is designed to connect directly to a Mp3 Player or any
other stereo level audio device.
19.Guitar Input(1/4"): Connect a guitar to this guitar input terminal.
20.
