INSTALLATION
DESKTOP USE:
A. Slide battery door down located on the rear of the Desktop Pro and
install battery. Install red wire to red battery terminal and black wire to
black battery terminal. NOTE: 90 degree red terminal connector prevents
ability to miswire. Battery installation is optional. Desktop Pro will operate
without battery as long as AC line power is present and connected.
B. Connect Desktop Pro power cord to Desktop Pro power cord connector
port
C. Plug Desktop Pro power cord into AC wall outlet
D. Connect 7-pin DC Power/Telemetry Wire into DC Output/Telemetry
Connector
WALL MOUNT USE:
A. Use provided wall mount template to install screws to the wall for
keyhole mounting of the Desktop Pro. NOTE: Ensure that AC Cord
provided will accomodate length needed from the Desktop Pro AC cord
power input connector to AC wall outlet
B. Follow steps A-D as instructed in “INSTALLATION: DESKTOP USE”
C. Use provided keyhole mounting option for Desktop Pro to hang on
previously installed screws.
BATTERY TYPE
Standard sealed lead acid battery rated at 12Vdc 7-8Ah
As long as AC line power is available, Desktop Pro can maintain operation
while battery is being replaced
PROCEDURE:
1. Remove the battery cover from the back of the Desktop Pro
2. Slide battery out of the Desktop Pro and disconnect both red and black
connection wires from battery terminals and remove battery. NOTE:
Follow battery manufacturer specifications for proper disposal of battery
3. Install new battery by connecting red wire to red (positive) battery
terminal and black wire to black (negative) terminal and slide battery into
Desktop Pro battery compartment.
4. Replace battery cover
BATTERY REPLACEMENT
FCC NOTICE
This equipment has been tested and found to comply with the limit for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
these instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
tuning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures: (1) Reorient or
relocate the receiving antenna. (2) Increase the separation between the
equipment and receiver. (3) Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. (4) Consult
the dealer or an experienced radio/TV technician for help
CAUTION:
Any changes or modifications could void the authority granted
by FCC to operate this equipment
NOTE:
Precision Power reserves the right to change or correct the
contents of this document and does not assume any responsibility for
ommissions or errors.
PRECISION POWER
A PRECISION GROUP COMPANY
P: +1-615-879-3326
E: [email protected]
Website: www.precisionpwr.net
