background image

Thank you for choosing 

PPI

audio epuipment. Now, HANG ON! 

PPI

products are engineered and manufactured to deliver a wild ride of 
performance, sound quality, and reliability.  This 

PPI

product reflects our

commitment to offer you versatility and quality for years of incredible power
and listening enjoyment!

SERVICE

Do not attempt to service 

PPI

products yourself. Performing exploratory 

surgery on your audio equipment yourself will void the warranty.  All parts of
your 

PPI

gear have been built to our specifications. These parts are not

made available to any unauthorized 

PPI

dealer nor are they for sale. Our

goal is to make sure that your 

PPI

product will always perform as good as

the day it was purchased. Contact your authorized 

PPI

dealer about obtain-

ing any warranty service through 

PPI

. (See Warranty inside back cover.)

CAUTION!

The extended use of a high powered audio system may result in hearing loss
or damage.  While 

PPI

systems are capable of "Concert Level" volumes,

they are also designed for you to enjoy at more reasonable levels all of the
creative expressions made by musicians. Please stay seated while driving
and observe all local sound ordinances. 

Summary of Contents for PPI4240























Reviews: