Route wires around any
obstructions such as pedals
and levers under the dash
Protect all wires from chaffing
by avoiding sharp turns and
using grommetts where they
pass through metal
When cutting into panels
inspect for any hazards such
as computers or wiring harnesses
The installation of your new
PPI coaxial speakers should be relatively
simple; especially if you are replacing factory speakers of the same size.
However, if you are installing your speakers where there are not any
currently installed or if you are planning to install speakers larger than the
factory speakers, the process will be more difficult. If this is the case, we
strongly recommend a professional installation by your authorized
PPI
retailer.
Your
PPI coaxials are shipped with all the hardware you should need for
proper installation. Although, as with most installations, you may not use
all of the pieces. We recommend that you keep everything including this
owners manual and the original packing in case you decide to move the
speakers into another vehicle that may require a different type of
installation.
Before starting the installation make sure the system is operating properly.
Test the balance, fader and volume controls to ensure your system is
functioning properly. If everything is fine, proceed with the installation;
otherwise, locate the problems and have them repaired.
Replace all screws and fastners
securely to avoid potential noise
or other mishaps
9
