3
Mounting
To prevent damage to the DAC while driving, mount it in a
secure place. Choosing the appropriate location will depend
upon your vehicle and the complexity of your system design.
Keep in mind that the output of the
DAC-348 must go to a
preamp to control the volume of the digital source. To keep the
signal path as short as possible, the
DAC-348 should be
mounted as close to the head unit and preamp as possible.
Never mount the
DAC-348 in a location that would subject it to
immersion or exposure to water.
Once a location has been chosen, securely mount the
DAC-348 with four mounting screws. Be Careful! Inspect the
area underneath to be sure you are not drilling into wires, brake
or fuel lines, etc. that could be damaged by the drill bit or screws.
INSTALLATION / MOUNTING
12.656
13.113
4.415
5.125
Dimensions
5.125" W
13.11" L
1.750" H
BACK TO CONTENTS
