Mounting
To prevent damage to the
PEQ-114 while driving, mount it in a
secure place. Choosing the appropriate location will depend
upon your vehicle and the complexity of your system design. Typical
mounting locations for your new
PEQ-114 would be in the dash or
center console. Never mount the component in a location that would
subject it to immersion or exposure to water.
2
MOUNTING
Once a location has been chosen, securely mount the
PEQ-114 using
the two supplied brackets. There are two different sets of brackets
included with your
PEQ-114. One set is used to flush mount the
equalizer, as shown above. The other set is used for surface mount,
as shown on the next page. The brackets are connected to the
equalizer/preamp by two 6-32 x 1/4" socket head cap screws. We
have made the brackets adjustable to compensate for the uniqueness
of each vehicle. Be Careful! Inspect the area underneath to be sure
you are not drilling into wires, etc. that could be damaged by the drill
bit or screws.
BACK TO CONTENTS
