3
NOTE:
Before beginning, disconnect the negative (-) terminal of the battery
to prevent an electrical short to ground. Reconnect the negative
terminal only after all connections have been made.
Mounting
To prevent damage to the crossover while driving, mount it in a
secure place. Choosing the appropriate location will depend
upon your vehicle and the complexity of your system design.
Typical mounting locations include the trunk and passenger
compartment (floor or under seat). Never mount the crossover
in a location that would subject it to immersion or exposure to
water.
Once a location has been chosen, securely mount the
EPX-223 with four mounting screws. Be Careful! Inspect the
area underneath to be sure you are not drilling into wires, brake
or fuel lines, etc. that could be damaged by the drill bit or screws.
INSTALLATION / MOUNTING
Dimensions
5.125"W
7.020"L
1.813"H
7.020
6.646
4.415
BACK TO CONTENTS
