Precision matthews PM-1127VFI-LB, Safety & Training Manual

Page: 32 / 34

Lathe Use Test
1. Use brushes, vacuums and cloth rags for machine clean
up.
True False
2. Never attempt to measure a part on a lathe while the spindle
is turning.
True False
3. It is not necessary to keep the floor around your machine
clear of chips.
True False
4. Round stock can be held in a _______________ chuck
when turning a part on a lathe.
A. 3-jaw universal
B. 4-jaw independent
C. Collet
D. all of the above
5. When turning a part on a lathe the tool bit should be on or
slightly below center.
True False
6. Brass and aluminum may be machined faster than steel.
True False
7. Never wear jewelry or loose clothing while operating
machine.
True False