PD6600 Series Loop-Powered Process Meters
Instruction Manual
21
Remote Operation of Meter
The meter is equipped with a digital input that can be
programmed to perform various functions. Common
uses for this digital input would be for resetting the
met
er’s relays or open collectors, starting and
stopping timers, and displaying max/min values. The
digital input could be connected to a
single button remote control station as illustrated in
For a complete list of Digital Input settings, see
Keys & Digital Input Available Settings
on page
Note:
These control stations do not carry hazardous area
approvals and are thus not suitable for location in hazardous
areas. The use of additional protective devices may allow
them to be installed in a safe area and connected to a device
in a hazardous area. User should consult a professional
engineer to determine suitability of these products for their
specific application.
Figure 15. PDA2361-R Control Station
Connected to PD6604
Available Single Button Control Stations
PDA2360-E
PDA2361-A
PDA2361-B
PDA2361-R
PDA2361-T
PDA2361-S
PDA2361-Q
Wiring Connections for MOD-LH Models
The following diagram is for MOD-LH models with a
single color light.
The Light / Horn cannot be powered by
the 4-20
mA loop.
To use the Light / Horn an external power
supply must be used such as the
the following diagram illustrates.
Figure 16. Light / Horn and Button (MOD-LH)
Connected to PD6604
Available Light/Horn Colors
PDA-LHR
PDA-LHB
PDA-LHG
PDA-LHY
PDA-LHW
