03/06/2012
Confidential and Proprietary Information
Precision Circuits Inc
One Place Monitor Panel
The One Place Monitor Panel has three automatic learn features :
1. If the Water and Waste Tanks have 1/3 or 1/4 increment sensors.
2. If a second Gray and/or second Blank Waste Tank exists.
3. If Water Heater Function exists.
Each feature above is learned independently, even for the individual Tanks.
Once a feature is learned, it is stored in non-volatile memory, and remembered even if Battery Power is removed
from the Panel.
The One Place Monitor Panel has many safe guards to prevent improperly learning a feature. Should the Panel
have learned something incorrectly, an option exists on the Panel to reset the original factory default, so that the
Panel can re-learn the proper features.
To Reset the Panel to Default
1.
Press and hold all three buttons shown above for
approximately 6 seconds, until the above screen appears.
2. Press the Default Button (Water Pump)
3. Press the Exit Button (Battery Level).
4. The Panel will return to the Water Pump Display.
Example Messages
when Selecting desired
Function to control.
Water
Pump
F a ct o ry M o d e
D f l t
T es t
E xi t
Tank
Level
Battery
Level