PreCise MRM
Installation and Operation Manual
WCM-02
1311 East Franklin Road, Suite 102
Meridian, Idaho 83642
Support: 1-888-254-1634
a subsidiary of FORCE America
WCM-02C
Copyright 2017
Sales: 1-888-449-0357
p. 2 of 14
Warnings & Cautions
•
Read and follow all safety rules and instructions before installing or operating this equipment.
•
Never operate a vehicle within a closed area. Always assure proper ventilation before starting
engine.
•
Always use eye protection. Use goggles that are ANSI approved against impacts and shattering.
•
Before wiring, disconnect the negative cable from the battery terminal.
Failure to do so may result in
electric shock or injury due to electrical shorts.
Batteries can generate explosive gases. Keep sparks,
flames and smoking materials away from batteries. Always wear eye protection around batteries.
•
Do not damage pipe or wiring when drilling holes.
When drilling holes in the chassis for installation,
take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure
to take such precautions may result in fire.
•
Do not use bolts or nuts in the brake or steering systems to make ground connections.
Bolts or
nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be
used for installations or ground connections. Using such parts could disable control of the vehicle and cause
fire etc.
•
Arrange the wiring so it is not crimped or pinched by a sharp edge.
Route the cables and wiring away
from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to
the wiring. If wiring passes through a hole in metal, use a rubber grommet to prevent the wires insulation
from being cut by the metal edge of the hole.
•
When making connections to the vehicle's electrical system, be aware of the factory installed components
(e.g. on-board computer). Do not tap into these leads to provide power for this unit. When connecting the
unit to the fuse box, make sure the fuse for the intended circuit has the appropriate amperage. Failure to do
so may result in damage to the unit and/or the vehicle.
•
Be sure to connect the color coded leads according to the diagram. Incorrect connections may cause the
unit to malfunction or damage to the vehicle's electrical system.
•
To avoid property damage, personal injury, or death, park the vehicle on a flat level surface, set the parking
brake, turn the engine off, and chock the wheels before beginning installation.
•
Do not mount the module in a location that could interfere with proper operation of the vehicle, such as
behind the gas or brake pedals.
•
Avoid any circuits associated with the airbag system. Inadvertent airbag deployment may cause personal
injury or death.
