Model No. BI-3500
May 2005
Pg. 5
OPERATING INSTRUCTIONS
1.
Ensure that the electrical supply matches with the electrical specifications on the data plate located on
the under side of the unit.
2.
Place suitable pan on the center of the ceramic top.
3.
Press power ON/OFF key, heating lamp will light and LED power level will be displayed.
4.
If the heating indicator light is on, then the pan is heating.
5.
Select mode "HEAT" or 'WARM" by pressing the required key, the indicating lamp will light.
HEAT
Press heat function key, heat indicator lamp will light.
Set heating level by rotating the power control knob 1~19. LED display will show the level
settings.
WARM
Press WARM function key, warm indicator lamp will light.
Set required temperature by pushing "up arrow (+)" & "down arrow (-)" key. The selection is
from 50
o
C to 240
o
C, each additional 10
o
C per step.
The warm indication light will flash until the required temperature is reached.
When using the 'WARM' mode the rotating power control knob will not function.
To change from 'WARM' to 'HEAT' press the heat function key and the power control knob will
be activated.
NOTE
When the unit has been turned 'ON' the heating indicating light will be on. This indicates that the
pan is heating.
If the indicating light is OFF and there is a beeping noise this indicates that
- the pan is not suitable
- there is no pan on the ceramic top
The unit is equipped with an
"OVERHEATING PROTECTION DEVICE".
When the temperature
of the cookware base is too hot, the power will cut out. The heating indication light will flash
indicating that the over heating function is on.
Once the temperature reduces, the power will automatically re-start.
CAUSE OF OVERHEATING
If an empty pan is placed on the ceramic top and the power level is at maximum the ceramic
surface will reach high temperature very quickly. Once the pan is removed from the unit or food/
liquid is added to the pan, the surface temperature of the ceramic top will reduce very rapidly.
CONTROL PANEL
