Precise Time and Frequency ptf 1226, Operation And Maintenance Manual

Page: 30 / 36

5.5. HTTP, Web Interface
The ptf 1226 web interface allows a sub set of the commands to be
entered via a web page through a standard web browser. The commands
available on the web interface are shown in the table below, and can also
be viewed on the web interface “vali commands” page;
Command Description Type Range Comments
D01 CH1 Input String Primary / Backup Locked when in
Auto
D02 CH1 Mode String Auto / Manual
D03 CH2 Input String Primary / Backup Locked when in
Auto
D04 CH2 Mode String Auto / Manual
D05 CH3 Input String Primary / Backup Locked when in
Auto
D06 CH3 Mode String Auto / Manual
D17 Date (UTC) String MM/DD/YYYY Only valid dates
(Manual or NTP)
D18 Time (UTC) String HH:MM:SS 24 hour format
(Manual or NTP)
D19 IP xxx.xxx.xxx.xxx IP address
D20 NET MASK xxx.xxx.xxx.xxx Net Mask
D21 GATEWAY xxx.xxx.xxx.xxx Gateway
D22 DHCP String Off or On
D23 Password integer Numbers only
D27 Serial Port
Baud Rate 9600, 19200,
or 57600
D28 IP snmp mgr xxx.xxx.xxx.xxx
D29 SNMP traps String ON or OFF
D30 IP NTP serv. xxx.xxx.xxx.xxx
D31 NTP update integer 0, 2 to 100000 0=no update
D32 Man. timeout integer 0 to 100000 secs 0=no timeout
D33 Telnet Port integer 1 to 65536 Default=23
D34 Tnet timeout integer 1 to 100000 secs 0=no timeout
Status Status string Status Give channel status
Anstat Analog stats string Anstat Analog o/p values
Logout Logout telnet
Reset System
restart